|
BPE MFP1101L3 1KVA ONLINE UPS
Product Details:
- Product Type BPE MFP1101L3 1KVA ONLINE UPS
- Power Rating 1 kVA
- Standard CE, ISO quality systems, BIS & RoHS compliance (reported)
- Frequency (MHz) 50/60 Hz Hertz (HZ)
- Protection Over/under voltage, overload, short circuit, battery low, temp protection (standard safety)
- Size Usually written as 144 400 215 mm (W D H).
- Warranty 1 YEAR
- Click to View more
BPE MFP1101L3 1KVA ONLINE UPS Price And Quantity
- 15000.0 INR/Unit
- 1 Unit
BPE MFP1101L3 1KVA ONLINE UPS Product Specifications
- Over/under voltage, overload, short circuit, battery low, temp protection (standard safety)
- BPE MFP1101L3 1KVA ONLINE UPS
- 1 kVA
- 1 YEAR
- CE, ISO quality systems, BIS & RoHS compliance (reported)
- Spec Measurement Width ~ 144 mm (~14.4 cm) Depth ~ 400 mm (~40 cm) Height ~ 215 mm (~21.5 cm) Millimeter (mm)
- Usually written as 144 400 215 mm (W D H).
- LCD/LED voltage, frequency, load, battery status
- Shows input & output voltages, frequency, battery status, load percent, and modes like Online, Battery, or Bypass for real time monitoring.
- This UPS typically uses a hard wired 3 wire connection (live, neutral, earth) rather than a simple plug in power cord i.e., the mains wires are connected directly to the UPS terminal block.
- 50/60 Hz Hertz (HZ)
- 220 V / 230 V / 240 V AC Volt (V)
- 1 PHASE
- 50/60 Hz Hertz (HZ)
- POWER SUPPLY
- STEEL
- 1 kVA ( 0.8 kW) Volt (v)
BPE MFP1101L3 1KVA ONLINE UPS Trade Information
- 7 Days
Product Description
Product Description BPE MF1101L3 1kVA Online UPS
The BPE MF1101L3 is a true online doubleconversion UPS designed to provide uninterrupted, clean power to critical equipment such as PCs, servers, networking gear, medical devices, and other sensitive electronics. It constantly conditions incoming AC mains power and supplies a pure sine wave output even during grid failures ensuring zero transfer time when switching to battery backup.
BPEMF1101L31kVA Online UPS Specifications
| Specification | Details |
|---|---|
| Model | MF1101L3 (1kVA / 0.8kW) |
| UPS Type | Online DoubleConversion (True Online) |
| Input Voltage | 110300V AC (wide range, load dependent) |
| Input Frequency | 50/60Hz 10% AutoSensing |
| Input Power Factor | 0.99 |
| Output Voltage | 220/230/240V AC 1% |
| Output Frequency | 50/60Hz Sync/Battery Mode 0.1Hz |
| Output Power Factor | 0.8 (standard), 0.9 (optional) |
| Load Capacity | 1kVA (0.8kW) |
| Efficiency | ~94% (Dual Conversion), up to ~99% (ECO mode) |
| Output Waveform | Pure Sine Wave |
| Crest Factor | 3:1 |
| THD (Output) | 1% (very low distortion) |
| Battery System | External battery bank (configurable) |
| Battery DC Voltage | Typically 36V or higher, depending on external batteries |
| Recharge Time | ~48hrs to 90% capacity |
| Display/Interface | LCD/LED voltage, frequency, load, battery status |
| Communication Ports | RS232 (optional SNMP/USB) |
| Protection Modes | Overload, over/under voltage, short circuit, battery low, over temperature |
| Bypass | Internal Automatic/Manual Bypass available |
| Physical | Typical Tower form factor (may vary slightly by seller) |
| Application | PCs, servers, networking, sensitive electronics, medical equipment |
Notes
-
True online UPS means zero transfer time during mains failure ideal for sensitive devices like computers and servers.
-
Backup time depends on the external battery bank size you connect (VAh rating). Typical runtime from small batteries is short (minutes), longer runtimes require bigger battery banks.
-
The unit includes standard safety protections and digital display for monitoring.
Price:
- 50
- 100
- 200
- 250
- 500
- 1000+
Other Products in 'Online UPS' category
![]() |
NAIVE ENGINEERS
All Rights Reserved.(Terms of Use) Developed and Managed by Infocom Network Private Limited. |




